Products – InoTek Solutions https://www.inoteksol.com Laboratory, Science, Engineering Fri, 01 Apr 2022 06:55:14 +0000 mk-MK hourly 1 https://wordpress.org/?v=5.8.6 Dry Owen https://www.inoteksol.com/dry-owen/ Tue, 08 Mar 2022 17:23:23 +0000 https://www.inoteksol.com/?p=2617 Universally applicable lab oven used for temperature control in research, science and material tests in the industry.

    • • Stainless steel chamber.
    • • LCD color 3.5-inch display.
    • • Fully autonomous and accurate temperature control using PID algorithm.
    • • Easy and intuitive selection of the desired temperature and monitoring of the current temperature.
    • • Data logging and visualization with InoLab software.
    • • Overheat and electrical protection.
    • • Conform to CE and EN13060.
    • • Manufactured under ISO norms.
Model 80L 300L
Volume (L) 90 320
Inner dimensions (mm) 400 х 500 х 450 640 х 940 х 540
Outer dimensions (mm) 550 х 820 х 640 785 х 1260 х 730
Weight (Kg) 65 120
Current 230V 50Hz
Power 1200W 2400W
Set temperature range 5°C above ambient up to 250°C
Set temperature resolution 0.1°C
Display temperature resolution 0.1°C
Work temperature 20°C to 40°C
]]> ULTRA PURE WATER https://www.inoteksol.com/ultra-pure-water/ https://www.inoteksol.com/ultra-pure-water/#respond Wed, 22 Sep 2021 15:30:26 +0000 https://www.inoteksol.com/?p=2497 Reverse osmosis filter with three-stage prefiltration and final filtration with carbon cartridge. Molecular prefilters are proven classical filter cartridges housed in double-sealed casings to provide the best possible protection against leakage.

  • the most economical model of high quality filters
  • can be used for drinking water and technical use
  • FIR (getting thanks to bioceramic cartridge) rays activate
  • metabolism, eliminate negative ions, bringing about natural curing
  • and immunity-increasing abilities
Dimensions 400x360x150 mm
Operating temperature 2-38 C
Operating pressure 2,2-6,0 Bar
Maximum TDS 1500 ppm
Feed water pH limits 2-11
Maximum chlorine concentration 0,3 ppm
Salt rejection 95%
Capacity 75 GPD or 284 Liters
Storage tank volume 12 liters
]]> https://www.inoteksol.com/ultra-pure-water/feed/ 0 PCR-CABINET https://www.inoteksol.com/pcr-cabinet/ https://www.inoteksol.com/pcr-cabinet/#respond Wed, 22 Sep 2021 07:24:55 +0000 https://www.inoteksol.com/?p=2487 For the preparation of PCR reactions and many other methods in
molecular biology, a contamination-free working environment is
required. The UVC/PCR-NB200 Workstation is designed for DNA/RNA
decontamination in the Laboratory working place.

 

Interior: AISI 304

Exterior: Metal quality - 08кр

  • Voltage 230V 50Hz
  • Heat fuses 0.5A
  • Time relay
  • Chamber ready indicator
  • UVC lamp
  • LED light
  • Two fans for air circulation through the UV lamp
  • Two EU power outlets IP54
Working surface 710x510
External dimensions 750x640x530
Weight 40kg
Current 10A
Power 2300W

 

]]> https://www.inoteksol.com/pcr-cabinet/feed/ 0 STERILIZER https://www.inoteksol.com/sterilizer/ https://www.inoteksol.com/sterilizer/#respond Mon, 13 Sep 2021 16:28:10 +0000 https://www.inoteksol.com/?p=2465 Continue Reading]]> Dry heat sterilization eliminates, removes, kills or deactivates all forms of life and other biological agents (such as fungi, bacteria, viruses, spore forms and prions) by raising the temperature of an item to above 160°C (320°F). Heated air or steam can be used in this process. Our lab sterilizers are ideal for laboratory and pharmaceutical applications.

Dry heat ovens have several advantages of steam autoclaves, including higher temperatures and the ability to sterilize materials that might be damaged to steam or are impenetrable to moist heat. It is the most effective sterilization method, with lower energy and cost.

 

Unlike its competitors, Inotek Solutions uses its own, sophisticated temperature management system. High accuracy and minimal fluctuations are achieved with the help of PID algorithm and Pt1000 temperature measuring probe. Heater operation and temperature can be monitored on a 3.5 ”LCD touch screen.

 

Set temperature resolution 0.1
Temperature fluctuations ±1°

 

Interior: AISI 304

Exterior: Metal Quality - 08kr

 

  • Automatic fuse B10A
  • Overheat protection - thermal switch
  • Electronic control management
  • Pt1000 temperature probe
  • 5” LCD Touch screen for easy and intuitive control and monitoring
  • Safety relay for electrical protection against temperature deviations
  • Thermal switch for mechanical thermal protection
Model 80L 300L
Volume (L) 90 320
Internal dimensions (mm) 400 х 500 х 450 640 х 940 х 540
External dimensions (mm) 550 х 820 х 640 785 х 1260 х 730
Weight (Kg) 65 120
Voltage 230V 50Hz
Power 1200W 2400W
Set temperature range 5°C above the ambient to 250°C
Set temperature resolution 0.1°C
Read temperature resolution 0.1°C
Operating temperature 20°C to 40°C
]]> https://www.inoteksol.com/sterilizer/feed/ 0 Hype ASM https://www.inoteksol.com/hype-asm/ https://www.inoteksol.com/hype-asm/#respond Tue, 25 Aug 2020 20:14:21 +0000 https://www.inoteksol.com/?p=2393 Continue Reading]]> Our technology is able to very quietly produce a large dense cloud of droplets the size of 1-5 microns which we call dry fog.

The small size of the drops allows the aerosolized disinfectant to retain the chemical properties of its liquid source, but also to act "like a gas". Due to its "gas-like" nature, the aerosol can treat multiple related areas, complex geometries...

HyPe ASM1.1           EVALUATION REPORT

Benefits of the HyPe ASM process:


• Completely removes (kills): Spores - Viruses - Vegetative bacteria
• "Extremely thin deposition layer" of micron droplets
• Safe to use / environment friendly process
• Without accumulating a large amount of drops
• Aerosol diffusion through the premises
• Long aerosol retention time
• Large area of coverage

 

Compressors 2 x 8бар , 210[L/min]
Number of spray nozzles Min. 1
Drop size <3 microns
H2O2 Tank 10 L
Display 3.5” full color touch screen
Noise Power EN12469 ≤75dB / NSF49≤75dB
Coverage Min. 400m /h
Working pressure 4,5 bar
Consumption H2O2 L/h/ depends of the volume
Build Material Stainless steel / Plastic

 

DIMENSIONS [mm]

Width A    1300
Height B 1900
Depth C  700

 

ELECTRICAL CHARACTERISTICS

Voltage [V] 230V 50-60Hz
Power [W] 1200W

 

ENVIRONMENTAL CONDITIONS

Temperature Max. 30°C
Humidity Max. 99%

 

]]> https://www.inoteksol.com/hype-asm/feed/ 0 LAMINAR FLOW HOOD https://www.inoteksol.com/laminar-cabinets/ https://www.inoteksol.com/laminar-cabinets/#respond Wed, 20 Nov 2019 20:47:31 +0000 https://www.inoteksol.com/?p=2327 A laminar flow cabinet is an enclosed workbench which is used to create a contamination free work environment through installed HEPA filters that capture all the particles entering the cabinet.A laminar flow hood is used for work with substances which are not hazardous for the personnel health.

  • 3.5” LCD touch display
  • Air filter - Camfil H14
  • Prefilter
  • UV-C lamp
  • LED light
  • Fan blower - Embpapst
Model      LFC 1220
Substrate dimensions      650x1230
External dimensions      1310x1960x790
Weight      180kg
Electrical Current      10A
Electrical Power      2300W
]]> https://www.inoteksol.com/laminar-cabinets/feed/ 0 HOTPLATE https://www.inoteksol.com/hotplate/ https://www.inoteksol.com/hotplate/#respond Mon, 18 Nov 2019 23:25:26 +0000 https://www.inoteksol.com/?p=2263 DUOIGNIS/UNOIGNIS 400C

Hot plates are laboratory tools used to uniformly heat samples.Hot plates are available with a number of different heating top styles. The most common types include those constructed from aluminum, ceramic materials or enamel.

Features:

  • Two independent plates.
  • Made out of stainless and chemical resistant components.
  • LCD color 3.5 inch display.
  • Fully autonomous and accurate temperature control.
  • Easy and intuitive digital selection of the desired temperature and monitoring of the current temperature.
  • Overheat and electrical protection.
  • Conform to CE and EN13060.
  • Manufactured under ISO 13485 norms.

 

Temperature range 50-400 °C
Temperature resolution 1 °C
Heating time <45 min (from 25 °C to 95 °C)
Fluctuation of temperature +- 5 °C
Electrical consumption 2.4 kW at 230 V, 50 Hz
Plate dimensions 300mm x 300 mm
Outer dimensions
Weight
]]> https://www.inoteksol.com/hotplate/feed/ 0 PHYTOTRONIC https://www.inoteksol.com/phytotronic/ https://www.inoteksol.com/phytotronic/#respond Mon, 18 Nov 2019 23:20:00 +0000 https://www.inoteksol.com/?p=2256 A phytotron (or growth chamber) is a machine used for the study and research of plants. It is designed to regulate the temperature and humidity of the internal chamber and provide various levels of illumination.

  • temperature regulation from -10°C to 70°C
  • humidity regulation from 30% RH to 99% RH at temperatures between 10°C and 70°C utilizing Peltier technology
  • three full spectrum + blue + pink LED lights which provide three levels of illumination
  • weekly configurable schedule with 24 hourly segments for each day
  • weekly record for average temperature and humidity for each hour
  • temperature calibration option
  • loss of power detection with schedule compensation
  • 120 L chamber,
  • 1320 mm tall, 580 mm wide and 800 mm deep
  • 7 inch interface touch-display
]]> https://www.inoteksol.com/phytotronic/feed/ 0 WATER BATH https://www.inoteksol.com/water-bath/ https://www.inoteksol.com/water-bath/#respond Mon, 18 Nov 2019 23:16:36 +0000 https://www.inoteksol.com/?p=2261 INOBATH, 15L & 30L

Designed for chemical, pharmaceutical, medical and biological routine laboratory use and as well as for research purpose.

 

  • Stainless steel tub.
  • LCD colour 3.5 inch display.
  • Fully autonomous and accurate temperature control.
  • Easy and intuitive selection of the desired temperature and monitoring of the current temperature.
  • Quick heat-up.
  • Overheat and electrical protection.
  • Conform to CE and EN13060.
  • Manufactured under ISO 13485 norms.
Specification 15L 30L
Temperature range From room temperature up to 95 °C
Temperature resolution 0.1 °C
Heating time <45 min (from 25 °C to 95 °C)
Fluctuation of temperature +- 0.5 °C
Electrical consumption 900 W at 230 V, 50 Hz 2.5 kW at 230 V, 50 Hz
Dimensions
]]> https://www.inoteksol.com/water-bath/feed/ 0 Destilator https://www.inoteksol.com/destilator/ https://www.inoteksol.com/destilator/#respond Mon, 18 Nov 2019 23:00:21 +0000 https://www.inoteksol.com/?p=2301 InoStill distillers are an excellent solution for a variety of industrial needs from rinsing to cooling, reducing downtime and often increasing machine life. These distillers are available in larger and smaller systems and can be customized to fit specific needs.

Heat water to a volatile vapor phase thus separating it from nonvolatile impurities.

]]> https://www.inoteksol.com/destilator/feed/ 0