• 3.5” LCD touch display
• Air filter - Camfil H14
• Prefilter
• UV-C lamp
• LED light
• Fan blower - Embpapst

Features:

• Two independent plates.
• Made out of stainless and chemical resistant components.
• LCD color 3.5 inch display.
• Fully autonomous and accurate temperature control.
• Easy and intuitive digital selection of the desired temperature and monitoring of the current temperature.
• Overheat and electrical protection.
• Conform to CE and EN13060.
• Manufactured under ISO 13485 norms.

• temperature regulation from -10°C to 70°C
• humidity regulation from 30% RH to 99% RH at temperatures between 10°C and 70°C utilizing Peltier technology
• three full spectrum + blue + pink LED lights which provide three levels of illumination
• weekly configurable schedule with 24 hourly segments for each day
• weekly record for average temperature and humidity for each hour
• temperature calibration option
• loss of power detection with schedule compensation

 

• Stainless steel tub.
• LCD colour 3.5 inch display.
• Fully autonomous and accurate temperature control.
• Easy and intuitive selection of the desired temperature and monitoring of the current temperature.
• Quick heat-up.
• Overheat and electrical protection.
• Conform to CE and EN13060.
• Manufactured under ISO 13485 norms.

Heat water to a volatile vapor phase thus separating it from nonvolatile impurities.

Features:

• Stainless steel chamber.
• LCD colour 7 inch display.
• Effective sterilization with steam; Independent 27 kW steam generator.
• Effective drying by high quality & performance vacuum pump.
• Multiple safety systems.
• Fully autonomous sterilization program cycles.
• Sterilization temperature: 121° C and 134° C.
• 6 standardized sterilization cycles and an option for User-defined cycle
• Intuitive and simple, yet informative display; Easy procedure for selecting and starting a program cycle in just few steps.
• No human intervention is needed once a program cycle is started, everything is automatic and controllable from the display.
• USB port for exporting program cycle data on a USB flash drive.
• Error detection system which notifies the user with a corresponding error code of the detected error.
• Double protection for overheating and overpressure which ensures safety after a malfunction has occurred.
• Smart door lock system which disables opening of the door when the chamber is under press.

Properties and benefits.

• EN 14175 compliance assures maximum operator safety.
• Low operating costs due to low airflow
• Extra large interior depth due to special worktop shape
• Dual-wall construction for maximum robustness with still ram.
• Exterior walls are made of epoxy resistant paint
• U-PVC internal chamber constructed of unplasticised polyvinylchloride
• Chain and Sprocket Sash support system. Electronic controlled via touch screen
• Hood lighting is pre-wired. Lighting 12 V 55 W or LED 12 V 7,5 W is electronically ballasted, energy efficient, instant start. Electronic control of intense of the light from 0 to 100 %
• Working surface is made from ceramics
• U-PVC internal work zone allows for easy cleaning of all surfaces.
• Removable baffle system allows for thorough cleaning inside the hood.
• Chain and sprocket system requires minimal service.
• Internal accesses panels are on front panels facilitate access to plumbing connections for service especially when hoods are installed next to each other.

Safety Features

• • Shaping vanes increase airflow "sweep" at the critical area at the sidewall to improve containment, especially when laboratory personnel walk fast in front of the hood.
  • Sash is made from polycarbonate to prevent hydrofluoric acid fume etching.
  • Sash stop limits sash movement beyond 457mm (18.0"), 'encouraging' user to work at safe positions.
  • When sash is raised above 457mm (18.0"), it will automatically and gently fall back to the safe level unless held in place. This allows the sash to be raised temporarily to the full open position for set up of equipment and apparatus in hood, while enforcing regular operation of the hood with lowered sash.
  • The sash is driven by 12 V DC motor controlled by SPS Software and it allows safe operation. Movement of the sash is limited by built sensors whose function is to stop sash on the obstacles even if they are transparent. Also the software permits the laboratory manager or safety officer to restrict operations at sash openings above 457 mm (18.0").
  • Sash key lock allows laboratory manager to restrict access to the fume hood.
  • The sash can also be locked down in the fully closed position with the key, in the event of a fume hood fault, facility shutdown, or, simply to restrict access to equipment set up in the hood.
  • Hot zone baffle system rapidly draws contaminants out of the fume hood work zone in a single pass displacement of air. With this feature, Thermal Heat Relief is quickly achieved.
  • Aerodynamic foil entry provides maximum airflow to "sweep" the critical boundary layer near the work surface level to reduce turbulence and eliminate backflow.
  • Ergonomic sash handle gently directs air into the hood without sacrificing visibility.